Introduction: What is the Difference Between Drywall and Plaster?

Drywall and Plaster. Well, it all starts with the design phase of your home renovation. That’s when you need to decide what type of plastering material you want in your walls. If you’re in need of a reliable, trustworthy Edmonton drywall contractor who will fix damaged drywall in your home, contact us today.

Drywall is a paneling material made of gypsum board and is often used in residential construction. It is typically hung on a wall or ceiling to create a flat surface. Drywall has been used in construction since the 1950s and it has many benefits over plasterboard.

Plasterboard, also known as “gyprock”, is a building material that is usually used for interior walls and ceilings. Plasterboard consists of plaster sandwiched between two sheets of heavy paper. This material was first used in the 1930s, but it wasn’t until the late 1990s that it became popular for use in residential construction.

Plaster is a material that is composed of finely ground lumps of gypsum, cement, and lime. Plaster can be used as a cheaper alternative to drywall, but drywall is more durable. Drywall is heavier and more durable than plasterboard and is most commonly found in homes that have been built both recently and historically. 

Drywall is the most common type of plaster in the US, but this isn’t the case everywhere in the world. In some countries, like Canada, plaster is more popular than drywall. In general, plaster is a lot cheaper than drywall because it doesn’t require any special equipment to install it. 

The Advantages of Using Drywall Vs. Plaster

Drywall is a more durable and practical material for walls in the home. Drywall is a better option to plaster because it is less expensive and more durable. It also reduces the amount of time needed to install, as well as the cost of labor. This means that you can save money on your project by choosing drywall over plaster. for your next construction project. 

The Advantages of Using Plaster for you wall

Plaster walls are a popular choice for homeowners looking to update their home with a budget-friendly option. Plaster is durable, easy to clean, and can be applied in many textures and finishes.

And Plasterboard is the lighter alternative to drywall, which performs better than drywall in areas that experience high humidity, for example kitchens and bathrooms.

Drywall is able to withstand more moisture, as well as adhere better to most surfaces and be installed faster. However, plastering has a higher strength-to-weight ratio, so it can weigh less than drywall and perform better in areas that experience high humidity. Plasterboard also comes in different thicknesses and a wide range of colors for both interior and exterior use. If you are looking for a lighter option with more aesthetic appeal for your home, plastering is the way to go.

Steps for Installing Dry Wall Correctly for Interior Residential Walls

It is important to know the right steps for installing interior walls. This article will provide you with the right steps for installing dry wall correctly.

The first step: measure and cut the drywall sheets. 

The Second step: attach them together with screws or nails. 

The third step: measure and cut out any openings in the drywall, such as windows and doors. 

The fourth step : attach the drywall sections together with screws or nails. 

The fifth step : cover any openings in the drywall, such as windows and doors, with tape and spackle.


Drywall is used as a substitute for plaster because it is less expensive, easier to install, and more durable. Citi Drywall Repair in Kansas, MO, the most renowned drywall service states that the main difference between drywall and plaster is that drywall will not crumble like plaster does when it is removed from a wall.


Please enter your comment!
Please enter your name here